Designed to cut and form taped radial component leads, the curl formed by this model allows the components to remain spaced and locked in the PCB, making assembly operations e...(more)
(Taped Component Machines -
Olamef)
Pneumatic machine designed to cut loose radial component leads, manual feed on top of the machine. Large variety of dies available. More powerful cylinders, stronger and more ...(more)
(Loose Radial Trimmers/Formers -
Olamef)
The TNS accessory helps to pull the tape out of the back of the machine after the components have been cut and formed. It mounts easily to any of the models designed for taped...(more)
(Accessories -
Olamef)
The model TP/IC-F has been designed for straightening the leads of IC components. The machine is supplied with tube holders to accomodate components having 0.3 and 0.6 inc. pi...(more)
(Tube Component Formers -
Olamef)
A very versatile pneumatic machine designed for cutting and forming taped radial components. The die assembly “SMS” is
equipped with a wire holder to keep leads firmly in pos...(more)
(Taped Component Machines -
Olamef)
The 2 cylinder TP/SC4 cuts and forms loose radial components, using available forms. A 3 cylinder model spreads out and forms the outer leads and spreads the central one. TP/...(more)
(Loose Radial Trimmers/Formers -
Olamef)
TP/TC4 is designed for cutting loose radial components. Two belts hold the leads and feed them through the rotory blades, that cut them, without any bur and damage to the comp...(more)
(Component/Lead Trimmers -
Olamef)
TP/TC5 is designed to cut and straighten directly from the stick, the leads of several
types of radial component, such as relays,
transistors and ICs.
(Tube Component Formers -
Olamef)
TP/TO-CF automatic machine designed to cut and form TO-220, TO-218, TO-126 transistors in tubes. Operation is automatic and PLC controlled.
(Tube Component Formers -
Olamef)
Cast frame TP6 is designed for cutting and bending taped axial components with lead diameter from 0.4 to 1.4 mm. Can be automated.
(Taped Component Machines -
Olamef)
The model TP6/PR-B is designed for cutting-forming and bending taped axial components. The “stand-off” form keeps the component body off the P.C. Board. The machin...(more)
(Taped Component Machines -
Olamef)
The model TP6/PR-F is designed for cutting, and forming taped axial components. There are three versions available depending on the lead diameter of the component: 0.5 to 0.9 ...(more)
(Taped Component Machines -
Olamef)
Cast Frame TP6/R is designed for cutting radial components on tape. It can be supplied for two types of tape: either with hole pitch 12.7 or 15mm. Can be automated.
(Taped Component Machines -
Olamef)
Fabricated frame TP6/R-EC is designed for cutting radial components in tape. It can be supplied for two types of tape: either with pitch hole of 12.7 or 15mm. Can't be automat...(more)
(Taped Component Machines -
Olamef)
Cast frame TP6/V is designed for cutting and bending taped axial components for vertical mounting. There are 2 versions: one for components with lead diameter from 0.5 to 0.8 ...(more)
(Taped Component Machines -
Olamef)
Fabricated frame. Designed for cutting and bending taped axial components for vertical mounting. 2 versions: one for components with lead diameter from 0.5 to 0.8 mm and the s...(more)
(Taped Component Machines -
Olamef)
The model TP6/V-PR is designed for cutting, bending and forming taped axial components for vertical mounting. The mechanism used with this model allows to change the height of...(more)
(Taped Component Machines -
Olamef)
Fabricated frame TP6-EC is designed for cutting and bending taped axial components with lead diameter from 0.4 to 1.3mm. Can't be automated.
(Taped Component Machines -
Olamef)
